The Attack on the Factory Floor Starts at the Front Office
When people hear “industrial control system attack,” they picture a power grid or a water plant. But the same kind of technology runs small manufacturers, machine shops, fabrication floors, commercial HVAC and building access systems. If your business has equipment controlled by a computer, this applies to you.
The most useful finding in recent industrial security reporting is also the least dramatic: attackers rarely go after the machine first. They go after the office.
Most industrial incidents start in IT
The industrial security company TXOne Networks found that 96% of operational technology (OT) incidents in 2025 traced back to a compromise of ordinary IT systems. In plain terms, the way to your equipment usually runs through an email account, a laptop, a shared password or a remote access tool, not through the equipment itself.
That matters because small businesses tend to connect everything. The office computers, the shop-floor PC, the CNC controller, the vendor’s remote support tool and the guest Wi-Fi often share one flat network. One phished employee on that network can reach all of it.
What the federal guidance says
In late April 2026, CISA, the FBI and the Departments of Defense, Energy and State published guidance on applying zero trust to OT environments. It recommends network segmentation, strong identity management, supply chain oversight, and compensating controls where the ideal restrictions aren’t practical.
You don’t need a government-sized budget to act on that. Three changes cover most of the risk for a small shop, and each one can be done at low or no cost.
Three fixes for this month
1. Separate the networks. Put machines and controllers on their own network, apart from the office computers and guest Wi-Fi. Then a compromised office laptop can’t reach the equipment directly. Most business-class firewalls and managed switches can do this with VLANs. If you’d rather not buy new hardware, OPNsense is a free, open-source firewall that runs on an inexpensive small PC.
2. Lock down remote access. This is the door attackers use most. Require multi-factor authentication (MFA) on every remote access path: email, VPN and vendor support tools.
- If you use Microsoft 365 or Google Workspace, MFA is included at no extra cost. Turn it on for every account.
- For VPNs, remote desktop gateways and other logins, Duo Free adds MFA at no cost for up to 10 users.
- Don’t leave remote desktop open to the internet. Give vendors access when they need it and turn it off when they’re done.
3. Know what’s connected. You can’t protect a device you’ve forgotten about. List every computer, controller, camera and appliance on your network, who uses it and how it connects, and review the list a few times a year. Our older guide on getting a complete network inventory walks through the process. Two inexpensive tools from Komodo Labs can do most of the work:
- NEWT Professional inventories the PCs and laptops on your network, including hardware and installed software. It’s free for small networks with 25 PCs or less. Paid licenses cost $195 for up to 75 nodes in total and $295 for up to 125.
- Slitheris Network Discovery finds every device with an IP address, including printers, cameras, controllers and other equipment. It’s free for up to 50 network devices.
- If you need both, every NEWT Pro license of 250 nodes or more comes with a free 256-device Slitheris license, a $195 value. The 250-node license costs $595. Don’t add Slitheris to your order, because Komodo Labs sends the free license automatically.
A warning before you scan. Inventory and discovery tools work by actively probing every device on the network. Office PCs handle that fine. Older industrial controllers, PLCs and HMIs often don’t. A scan can freeze them or knock them offline, which could stop production. If your industrial control systems share a network with your office or guest Wi-Fi, active scanning puts them at risk. Even if you’ve already separated the networks (fix #1), something may have been missed: a forgotten cable, a dual-homed PC or a vendor’s modem. Consult a professional before you start any active scanning.
Free help is out there
- NIST’s Manufacturing Extension Partnership (MEP) has cybersecurity resources for manufacturers written for small and mid-sized shops. They include a “where to start” guide, incident response and recovery plan templates, and a self-assessment tool. Local MEP Centers can also help you assess your risk.
- CISA’s free cybersecurity services and tools catalog lists no-cost services and tools from CISA and the wider security community.
- CISA’s Cyber Hygiene vulnerability scanning checks your internet-facing systems for known weaknesses at no cost. Eligibility rules have changed over time, so confirm with CISA that your business qualifies.
- The FCC’s cybersecurity for small businesses page includes tips and a planning tool that builds a basic security plan from a few questions.
- NIST’s Cybersecurity Framework includes resources for critical infrastructure. It’s free and works as a roadmap once the basics are in place.
- For more free tools, PurpleSec’s free cybersecurity tools for small business and Aspire Cyber’s 15 free resources for small businesses are good places to look.
None of this is exotic. These are the basics, and the reporting shows the basics are where most incidents are won or lost.
Sources: TechTarget, “News brief: Critical infrastructure, OT cybersecurity attacks” (May 2026); Komodo Labs product pages; Duo; NIST MEP; CISA; FCC; NIST; PurpleSec; Aspire Cyber.
Still confused? We’re here to help. Contact us at help (at) myremotesupporttech (dot) com.